Address Book (Specifying a Destination PC Using the Address Book)
You can specify the server name, user name and other information from the address
book.
For information on settings of the address book, refer to "5 Tools" > "Setup" > "Add Address Book
Entry" in the Administrator Guide.
1
Select [Address Book].
2
Select the destination in which data is to be
stored.
3
Select [Add].
Important • You can only use destinations configured
Note
• Select [
Name Protocol
Lists recipient names and protocols.
Add
Adds a selected recipient to the [Save in] box.
Save in
Displays a selected recipient.
Go to
Enter the desired speed dial number with the numeric keypad. The corresponding
address appears at the top of the list.
Details
You can confirm information such as [Name] and [Server Name/IP Address].
Browse... (Specifying a Destination PC by Browsing Your Network)
Displays a hierarchy consisting of server names and folders. You can specify a save
destination by tracing the hierarchy.
1
Select [Browse...].
2
Select the destination in which data is to be
stored.
You can move to another level by pressing
[Previous] or [Next].
Important • You can specify recipients for SMB only.
Save in
Shows the current location in the hierarchy.
for SMB or FTP. You cannot use
destinations for faxes, e-mails or Internet
Faxes.
] to return to the previous
screen and select [
] to move to the next
screen.
Scan to PC
5
231