Starting The Copy Job - Xerox DocuCentre SC2020 User Manual

Copy
The entered value appears in the display.
Note: If you make a mistake, press the <C> (Clear) button, and then re-enter the setting.

Starting the Copy Job

1. Press the <Start> button.
If document is placed in the document feeder, do not press down on the document while it is being
fed through the device.
Note: If a problem occurs, an error code appears on the screen. For information on error codes, refer to
Error Code on page 277.
Placing document on the document glass
• Copying multiple sets of documents
You can continue copying multiple sets of documents using any of the following settings:
• Collation: Collated
• 2-Sided Copying: 1  2-Sided/2  2-Sided
• Pages Per Side: 2-Up
73 ®
Xerox DocuCentre
User Guide
®
SC2020
<C> (Clear) button
Redial/Pause
Power Saver
Clear All Stop
Start
Error
Data
<Start> button
Redial/Pause
Power Saver
Clear All Stop
Start
Error
Data