Start The Job; Stop The Copy Job - Xerox WorkCentre 3215NI User Manual

Copy Procedure
• Use the keypad or the up/down arrows on the control panel to enter the number of copies
required. The number entered is displayed in the lower right-hand corner of the display.
Note: To cancel an incorrect entry, press Clear All and enter the correct quantity.

Start the Job

1. Press Start. Each document is scanned only once.
2. If using the document glass to scan 1-2 sided originals, the machine displays a message when
ready to scan side 2. Continue scanning until all sides have been scanned.
The images are scanned and the copy job is printed.

Stop the Copy Job

To cancel an active copy job, on the control panel, press Stop.
118 Xerox® WorkCentre® 3215/3225
User Guide