Offset Stacker Tamper Drive Belt Removal - Lexmark 7462 series Service Manual

Offset stacker tamper drive belt removal

1
Remove the offset stacker tamper recoil spring.
2
Pull the belt out the tamper belt holder and remove the belt from the pulley.
Offset stacker tamper drive motor assembly removal
1
Remove the offset stacker top cover. Go to
2
Pull slack in the tamper drive belt and remove the belt from the tamper drive belt pulley.
3
Disconnect the tamper driver motor harness from the controller card.
"MFP stapler assembly top cover removal" on page
Repair information
455
7462
450.