Fuser Drive Motor Assembly Removal - Lexmark C540n Service Manual

Fuser drive motor assembly removal

See
"Fuser drive motor assembly" on page 7-5
Open the front cover.
1.
Remove the right cover assembly. See
2.
Disconnect the cable (A) from the fuser drive motor assembly.
3.
Note: If you remove the toroid (B) from the cable, be sure to return the toroid to the cable when you re-
install.
Remove the two screws (C).
4.
Remove the fuser drive motor assembly.
5.
for the part number.
"Right cover assembly removal" on page
5025-2xx, 4xx
4-12.
Repair information
4-35
Previous
Next
Go Back