Oki OKIOFFICE 84 Service Manual page 97

26 Strobe for LED head
Copyright 1998, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business Partner
Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
Setting of LED print head strobe signals
(00000-11111).
Selection of strobe width in LED head.
"00000" is lightest and "11111" is darkest.
Note 1:
When the rank marking of the new
replaced LED print head (new part) is same as
that of the old used LED print head (old part), you
do not always have to set the LED print head
strobe signal.
Note 2:
Intensity ranking is determined by the first,
second and third digits from the right on the LED
print head serial number.
(i.e. in .... 212, 212 is the intensity ranking.)