Registration Roller - Oki OKIOFFICE 84 Service Manual

4.3.12 Registration Roller

1
Disassembly procedure
a) First, carry out procedure up to the point of the 4.3.2 (ID Unit, Cover-Rear, Cover-NCU and
Cover-MAIN).
b) Move registration roller to the right and dismount it by lifting. (Two registration bearings also come off
at the same time. Take care not to lose them.)
2
Reassembly procedure
Reverse the disassembly procedures.
Copyright 1998, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business Partner
Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
Service Guide OKIOFFICE 84
Chapter 4 Disassembly
Page: 123