Oki OKIOFFICE 84 Service Manual page 123

User's Function Table 2.9.4 (2/5)
No. Item
4 Automatic redial
5 Last No. redial
6 Group dial
7 Telephone directory and location ID
(Alpha search)
8 Voice request
9 Local copy
10 Multiple local copy
11 Manual loading feeder
Copyright 1998, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business Partner
Service Guide OKIOFFICE 84
Chapter 2 Installation
Specifications
PTT parameter setting disables or enables this feature, and
specifies redial times and redial intervals.
* See 2.9.12 for the service bit condition depending on PTT
parameters.
"REDIAL" key is provided. There is no limit on number of repeat
attempts. If machine is in Power Save mode (not available for
OKIOFFICE84) manual redial with REDIAL key is not possible.
l
5 dialling groups
Max. 80 locations.
Grouping some one-touch keys and some two-digit auto dial
codes to which telephone numbers have been assigned. This
group setting makes broadcast operation simple.
In addition to fax numbers, an alpha/ numeric name can be
assigned to each of one-touch keys and two-digit dial codes, 01
to 70. Any location ID can be searched and displayed on LCD.
Then direct dialling to the ID's station can be performed.
There are two methods of searching:
(1) Search based on the first character specified.
(2) Searching by displaying all registered location IDs
one after another in the lexicographical order.
Location ID: Max. 15 characters
A voice request from the transmitter is available only upon
completion of the total message transmission.
A voice request from the receiver is available at the end of each
page being received.
Printing resolution:
Horizontal: 300 dpi (Fine, EX Fine), 200 dpi (SDT)
Vertical: 3.85 (STD), 7.7 (Fine) or 15.4 line/mm (EX Fine)
Up to 50 copies.
One single sheet from the feeder below the paper exit can be
copied.
Example of sheets: Transparency for an overhead projector
Page: 67