Reports & List Specifications (1/2) - Oki OKIOFFICE 84 Service Manual

Hide thumbs Also See for OKIOFFICE 84:
Table of Contents

Advertisement

1.6.1 Reports & List Specifications (1/2)
Note:
F +OT: Press FUNCTION and One-touch key
FP:
Function program setting
TF:
Technical function setting
No.
Item
1
Call-back message
2
Sender ID
3
Transmitting subscriber
identification (TSI) printing
4
Cancel report (Power outage
report)
5
Activity report
6
Message confirmation report
7
Broadcast entry report
8
Broadcast confirmation report
9
Confidential reception report
10
Memory files report
11
Telephone directory
12
Configuration report
13
Protocol dump report
Service Guide OKIOFFICE 84
Chapter 1 General Information
Specifications
The transmitter sends a call-back message to the receiver only
when the receiver does not respond to voice request of the
transmitter.
The fax can transmit a programmed alphanumeric message,
such as company's name, consisting of up to 32 characters.
* (Outside only)
Received TSI can be printed at the top of the received page.
* TF + 05 (To enable or disable this function)
The fax will automatically print out a power outage report when
the AC power is restored after the power failure.
The fax can print out an activity report manually, and provides a
record of your fax machine's last 30 communications. This report
does not contain the results of messages which were received
without errors. However it does contain messages received in
memory with or without errors.
* REPORT PRINTOUT+1(Manual printout)
The fax can print out a message confirmation report manually or
automatically in the following cases.
(1) Manual print
By pressing the COPY key after a communication
(2) Automatic printout
When the FP+01 (to enable or disable automatic printing after a
communication) is set to Enable.
The fax can print out a broadcast entry report if specified during
operating sequence of a broadcast.
The fax can print out a broadcast confirmation report manually or
automatically.
* COPY key (Manual printout): Pressed after a broadcast.
* REPORT PRINTOUT + 2 (Manual printout)
* FP +02 (To enable or disable automatic printing)
The fax can print out this report automatically on completion of a
confidential reception.
Printing the list of received but not printed yet documents and
waiting documents for transmission stored in the memory.
* REPORT PRINTOUT + 3 (Manual printout)
This directory is printed manually.
(REPORT PRINTING + 4)
This report is printed manually.
(REPORT PRINTING + 5)
This report is printed manually.
(REPORT PRINTING + 6)
Page: 21

Advertisement

Table of Contents
loading

Table of Contents