Oki OKIOFFICE 84 Service Manual page 88

Service Personnel Initial Settings Table 2.9.2 (1/7)
T.F. Item
No.
01 Service bit
02 Line monitor control
03 Country code
04 Time and date print
05 TSI print
Copyright 1998, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business Partner
Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
Service Guide OKIOFFICE 84
Chapter 2 Installation
Specifications
Switching serviceman/user operation.
ON : Service personnel's features are available.
OFF : Service personnel's features are not
available.
To enable or disable the following functions:
l
Drum (Total, Print, Scan), and toner counter
clear
l
Dial parameters
l
etc
Changing the audible monitoring range.
FP +06 (To select the loudness of monitoring)
ON : Enable
OFF : Disable
Note:
In case of transmission mode, the monitor
will be available during dialing, but the monitor will
be switched off automatically
after the elapse of specified time (about 5
sec.). However, when TF02 is set to ON,
the monitor is available during communication
also.
Selecting the following country code:
USA, INT'L, GBR, IRL, NOR, SWE, FIN, DEN,
GER, HUN, TCH, POL, SUI, AUT, BEL, HOL,
FRE, ESP, ITA, GRE, AUS, NZL, SIN, HNG, POR,
LTA, MEX
Enables or disables the function of printing local
date and time at the top of the received page.
OFF/ONCE/ALL selectable.
OFF: Time and date are not printed
ONCE: Time and date are printed at the top of the
first page only.
ALL: Time and date are printed at the top of every
page.
Note:
Set at receiver.
Switches the function of printing TSI data from
remote fax onto the received pages. TSI is printed
at the leading edge of first reproduced copy. (Set
at receiver.)
When TF04 is set to "ALL", TSI is printed for the
all received pages.
ON : Enable
OFF : Disable
(Reference)
TSI; Transmitting Subscriber Identification
Page: 48
Default