6.3 Printer Counter Display/Clear (User)
Note:
The fonts displayed on the LCD operation panel may differ from the fonts written in this manual.
1. Purpose
A user can clear the image drum counter (only when "Change Drum Soon" message is displayed) and also check
some of the other counters (such as the print counter, scan counter) by using the <--- key or ---> key.
2-1. Procedure
The following shows the case when the service bit has been set OFF and TONER COUNT CLEAR = OFF
Note:
Clear Operation
No. of print counter and scan counter (pages) will appear but cannot be cleared by user.
Service Guide OKIOFFICE 84
Chapter 6 Cleaning and Maintenance
Page: 142
.