Oki OKIOFFICE 84 Service Manual page 20

Table 1.5.1 (1/9) Basic Performance Specifications
No. Item
1
Applicable line
2
Line interface
1) Impedance
2) Sending power level
3) Receiving power level
3
Type of document to be
transmitted
1) Width
2) Length
3) Thickness
4) Shape
5) Opacity
Copyright 1998, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business Partner
Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
Service Guide OKIOFFICE 84
Chapter 1 General Information
Specifications
1) General switched telephone network (GSTN)
2) Private branch exchange (PBX) (OT9+2)
600 Ohms balanced
Note: Impedance may differ by the requirement of PTT.
0 dBm to -15 dBm range
(Adjustable in 1 dB steps. TF + 21)
0 dBm to -40 dBm or -6 dBm to -43 dBm
Max. 216 mm (NA Letter)
Min: 148 mm (ISO A5 size)
Note: Effective reading width is NA Letter 215 mm)
Min. 128 mm
Max. 356 mm (14 inches)
Long document detection: 380 mm, or 150 mm
* TF + 10 (To enable or disable the long document scanning)
Based on common bond paper
a) 0.08 to 0.13 mm for multiple page feeding
b) 0.06 to 0.15 mm for single page feeding
Rectangular
Documents allowing less than 40% of the scanner source light to
pass through them.
Page: 11