Oki OKIOFFICE 84 Service Manual page 378

Hide thumbs Also See for OKIOFFICE 84:

Table of Contents

Service Guide OKIOFFICE 84

Chapter A Board Descriptions

Report Printing

Figure A2.6 shows the report printing signal route.

This signal route describes the printing route of character data used to print Activity Report, Message Confirmation

Report, etc.

The report data is read into DRAM in the sequence the contents of data stored in the FLASH memory in advance

under the control of CPU. The contents of data is edited on the DRAM. The data is read out from the DRAM and sent

to IOGA4. The data is converted into a serial data by the picture control of IOGA4 and transferred to the LED print

head for printing as HDATA 0.

Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)