Oki OKIOFFICE 84 Service Manual page 21

Table 1.5.1 (2/9) Basic Performance Specifications
No. Item
4
Effective reading width
Document width Communication
Mode/Paper width
ISO A4 (210 mm)
[INTL/FTZ]
NA letter (216 mm)
[US/CANADA]
NA legal (216 mm)
[US/CANADA]
Note: Local copy: Printable reading width in local copy mode
No. Item
5
Automatic document feeder
(ADF)
6
Document skew
7
Document jam detection
8
Document jam removal
Copyright 1998, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business Partner
Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
Service Guide OKIOFFICE 84
Chapter 1 General Information
Specifications
Effective reading width
G3/A4 208 mm for TX
203.2 mm for local copy
(208 mm for local copy with
Horizontal Reduction = ON)
G3/A4 215 mm for TX
203.2 mm for local copy
(214 mm for local copy with
Horizontal Reduction = ON)
G3/A4 215 mm for TX
203.2 mm for local copy
214 mm for local copy with
Horizontal Reduction = ON)
Specifications
Max. 20 documents for OKIOFFICE 84: NA Letter or A4 (20-lb./75
gm)
Max. 15 documents: NA or A4 (16-28 lb.-60-105 gm bond paper)
Documents shall be placed facedown on ADF stacker.
The first sheet will be fed first in the feeder and will exit facdown in
the document stacker.
Max. 2.6 mm skew over a document of A4 length.
For a document longer than A4 length, occurrence of skew exceeding
2.6 mm over any A4 length is 0.5% or less. (Except 13 lb.)
1) Transmission will stop and line disconnection will occur when the
end of a document is not detected within 356 mm after scanning
begins (except for the long document scanning. TF + 10)
2) A jam will also be declared if the document does not reach the
scanning position within 10 seconds after the start of a document
feed.
Note: When a jam is detected during message transmission from the
feeder, the machine will stop scanning and disconnect the line, but its
receiving capability will remain valid.
Manual release
Page: 12
Copy size
A4
Letter
Legal