Settings Of Technical Function No. 26 (Table 5.1.1) - Oki OKIOFFICE 84 Service Manual

Page: 131
Service Guide OKIOFFICE 84
Chapter 5 Adjustments

Settings of Technical Function No. 26 (Table 5.1.1)

Notes:
The luminous intensity ranking is determined by the first, second and third digits from the right in the LED print head
(i.e. in ---XX122, 122 is the luminous intensity ranking.)
This adjustment should be made whenever the main control board (R44 PCB) or the LED Head are replaced.
In addition, this setting should be verified on initial unit install, or whenever firmware is updated.
Copyright 1998, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business Partner
Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)