Oki OKIOFFICE 84 Service Manual page 447

B.3 Paper Jam Detection
The OKIOFFICE 84 monitors the paper status when the power supply is on and during printing. In the following
cases, the unit interrupts the printing process as a paper jam. Printing can be recovered by opening the cover
removing the jammed paper, and closing the cover.
Error
Paper inlet jam
Paper feed jam
Paper outlet jam
Paper size error
Copyright 1998, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business Partner
Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
Chapter B Print Operation Description
Cause of Error
l
Only the manual feed sensor detects "Paper exists" when the power
supply is on.
l
The leading part of the paper does not reach the paper sensor although
hopping operation was performed three time.
l
The leading part of the paper does not reach the outlet sensor within a
fixed time after it has passed the paper sensor.
l
The trailing part of the paper does not pass the outlet sensor within L
mm after the leading part of the paper has passed the outlet sensor.
2.52" (64 mm) L 15.77" (400.6 mm) < = L = >
l
The trailing part of the paper does not pass the paper sensor within L
mm after the leading part of the paper has passed the paper sensor.
2.52" (64 mm) L 15.77" (400.6 mm) < = L = >
Service Guide OKIOFFICE 84
Page: 264