Page: 58
Service Guide OKIOFFICE 84
Chapter 2 Installation
TAD Mode Flow Chart (Type 2)
If the fax does not detect CNG signal during working of TAD, the machine will go to standby mode.
The fax does not detect CNG signal during 15 seconds from TAD operation starting. The fax starts CNG signal
detection after 15 seconds from TAD operation.
When the fax does not detect CNG signal and ends TAD operation (on-hook of TAD operation), the fax return to
standby state.
Copyright 1998, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business Partner
Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)