Oki OKIOFFICE 84 Service Manual page 140

Table 2.9.4 (1/5) User's Initial Settings (Functions Program)
2)-2 Function Program
F+OT Item
No.
01 Message confirmation report
(Single location)
02 Message confirmation report
(Multiple locations)
03 Error report (MCF)
04 Image in MCF
05 Sender ID
06 Line monitor volume
07 Buzzer volume
Service Guide OKIOFFICE 84
Chapter 2 Installation
Specifications
Enables or disables the automatic message
confirmation report printing after a single location call.
ON: Printing the MCF report.
OFF: Disables this function.
Enables or disables the automatic message
confirmation report printing after a multiple polling or
broadcast.
ON: Prints the MCF report.
OFF: Disables this function.
Enables or disables the automatic error report printing
when transmission error occurs.
(Excepts for service bit "0".)
ON: Printing the error report.
OFF: Disables this function.
Enables or disables the automatic printing of the
image on the first sheet below the message
confirmation report.
ON: Printing the image in MCF report. (Memory
transmission and if the report is printed automatically.)
OFF: Disables this function.
The fax can transmit programmed alphanumeric
message, such as company's name consisting of up to
32 characters.
Enables or disables the sender ID function.
* (Outside only)
ON: Enables
OFF: Disables
Controls the volume.
OFF/Low/High selectable.
Selects the sound volume of each buzzer (end of
communication buzzer, voice request buzzer and
off-hook alarm) and software ringer from high, low and
middle levels.
Low/Mid/High selectable.
Note:
Fixed a low level for key touch tone.
Page: 77