Oki OKIOFFICE 84 Service Manual page 90

Service Personnel Initial Settings Table 2.9.2 (2/7)
T.F. Item
No.
06 TAD mode
(For external telephone answering
device.)
07 Real time dialing
08 TEL/FAX switching
Service Guide OKIOFFICE 84
Chapter 2 Installation
Specifications
Switches an automatic voice message response to
the calling station.
TAD mode is of three types
(TYPE1/TYPE2/TYPE3).
OFF/TYPE1/TYPE2/TYPE3 selectable.
TYPE1 means:
1. RING comes.
2. The TAD answers, returns the recorded voice
message in TAD to calling party.
3. The FAX machine will continue to detect CNG
signal while TAD works.
4. If the FAX machine detects CNG signal, the fax
will go into normal receiving mode.
5. Even though the fax does not detect CNG
signal, the fax will go to receiving mode in hook-on
condition.
TYPE2 means:
The function from No. 1 to No. 4 of upper TYPE2
are the same as TYPE1.
5. If the fax does not detect CNG signal during
working of TAD, the machine will go to standby
mode.
TYPE3 means:
The function from No. 1 to No. 2 of upper Type 1
are the same as TYPE1.
3. The fax does not detect CNG signal during 15
seconds from TAD operation starting.
4. The fax starts CNG detection after 15 seconds
from TAD operation. If the CNG is detected, the
fax goes to the normal receive mode.
5. If the fax does not detect the CNG during TAD
operation, the fax goes to standby mode.
Enables or disables the real time dialing.
3 types selectable. (OFF/TYPE1/TYPE2)
TYPE1: Real-time dialing is available when the
telephone handset is OFF-HOOK.
TYPE2: Real-time dialing is available when the
telephone handset is OFF-HOOK or HOOK
key is pressed.
Enables or disables the TEL/FAX automatic
switching.
ON : Enable
OFF : Disable
(Related item: FP10, TF23)
Page: 49
Default