4.3.8 Transfer Roller
(1) Disassembly procedure
a) Open the cover assembly-top by raising and remove the ID unit
b) Remove the right claw. Then, dismount transfer roller, two registration bearing, and gear T.
(2) Reassembly procedure
Reverse the disassembly procedures.
Copyright 1998, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business Partner
Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
Service Guide OKIOFFICE 84
Chapter 4 Disassembly
Page: 119