Oki OKIOFFICE 84 Service Manual page 75

Hide thumbs Also See for OKIOFFICE 84:

Table of Contents

Service Guide OKIOFFICE 84

Chapter 2 Installation

2.6 AC Cord Connection

The power supply is provided as follows.

Nominal input voltage 120V AC (Voltage range 102 to 127V AC)

Nominal input voltage 230V AC (Voltage range 198 to 250 V AC)

Check whether the AC voltage of your input is within the above-mentioned voltage range and if so, check that

the power switch is turned OFF. After turning off the power switch, connect the female plug of the AC cord

to the machine and insert the male plug of the AC cord to the inlet receptacle.

Turn the power switch ON and check that the display shows "(Time)" message indicating the standby mode.

Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)