Page: 65
Service Guide OKIOFFICE 84
Chapter 2 Installation
2.9.4 User's Functions
This section explains the items usually set up by general users.
Table 2.9.4 shows the initial setting items and their purposes.
Each F.P. can be accessed by entering the corresponding function number on Function Programming.
The detailed procedure of the initial setting items will be explained on the following pages.
Note:
S-ON: Effective if the service bit has been set on.
FP: Function program setting
TF: Technical function setting
Copyright 1998, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business Partner
Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)