4.3.17 Paper Sensor E, Paper Sensor Exit and Toner Sensor Assembly
1
Disassembly procedure
a) First, carry out procedure up to the point of the 4.3.2 (ID Unit, Cover-Rear, Cover-NCU and
Cover-MAIN).
b) Dismount the high-voltage power supply board. (See Section 4.3.10)
c) Dismount the paper holder assembly. (See Section 4.3.11)
d) Dismount the heat assembly. (See Section 4.3.15)
e) Dismount the drive shaft E. (See Section 4.3.14)
f) Dismount the paper sensor E.
g) Dismount the paper sensor exit.
h) Dismount the toner sensor assembly.
2
Reassembly procedure
Reverse the disassembly procedures.
Copyright 1998, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business Partner
Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
Service Guide OKIOFFICE 84
Chapter 4 Disassembly
Page: 128