Adjustments; Setting Of Led Print Head Drive Time - Oki OKIOFFICE 84 Service Manual

Page: 130
Service Guide OKIOFFICE 84
Chapter 5 Adjustments

5.1 Setting of LED Print Head Drive Time

l
Adjustment point: Technical Function No. 26.
* To bring the LCD up to Technical Function, press SELECT FUNCTION key once, COPY key twice and "2" key (In
case of no message in memory).
Note:
When the rank marking of the replaced LED print head (new part) is the same as that of the used LED print
head (old part), you do not always have to set the LED print head drive time.
Adjustment:
1) Turn AC power ON.
2) Setting of LED print head should be according to the Table 5.1.1 (See next section in this chapter).
Copyright 1998, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business Partner
Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)