Oki OKIOFFICE 84 Service Manual page 126

User's Function Table 2.9.4 (4/5)
No. Item
18 No toner reception
19 Smooth printing
20 Dual Access
Copyright 1998, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business Partner
Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
Service Guide OKIOFFICE 84
Chapter 2 Installation
Specifications
The fax can temporarily store received messages in memory
when toner has run out. The messages are printed when toner
has been newly supplied or an operator presses the SELECT
FUNCTION key followed by the one-touch key No. 2 under the
LCD message "PRINT MEMORY MSG." in the standby mode.
*FP + 22 (To enable or disable this function)
The documents received in the STD mode can be printed at the
FINE resolution by means of generating one line based on the
two consecutive original lines and printing it between them.
The documents for transmission can be read into the memory
even while the fax is engaged in another memory transmission,
reception in the ECM or non-ECM mode.
1) Operation of memory transmission while the fax is engaged in
a communication (memory TX, memory RX or print mode RX).
2) Copy while the fax is engaged in a communication (memory
TX or memory RX).
Note: Condition for operation
a) Copy is invalid when the machine is already engaged in an
operation which is using or could use the printer.
3) Call reception while the fax is engaged in scanning
documents for memory transmission when the auto receive
mode is in "FAX" or "T/F" mode, although "TEL" mode is not
valid.
Refer to sub-section 2.9.7 for dual access operation.
For the patterns of dual access refer to the following, Dual
Access Combination Table.
Page: 69