Operate Ebl Maneuver Function (Ebl Maneuver) - JRC JMA-5212-4/6 User Manual

3.5.17 Operate EBL Maneuver Function (EBL Maneuver)

[I] Initial Setting (Reach,Turn Mode, Turn Set)
Procedure 1
2
3
4
Note: If the initial setting is not correct, the maneuver curve is affected.
Press [RADAR MENU] key.
Press [3] key.
Press [7] key.
The EBL Maneuver Setting Menu will appear.
Press [2] key.
The CODE INPUT Menu will appear.
Enter the Reach value and select ENT.
Press [3] to select Turn Mode.
The setting of turn mode will be switched
between RADIUS and RATE.
RADIUS: Constant turn diameter (NM)
RATE: Constant turn speed (deg/min)
Press [4] key.
The CODE INPUT Menu will appear.
Enter the Turn Set value and select ENT.
3 61