Web Basic Management; Port Status - Dynamix DV-24 User Manual

4.3 Web Basic Management

4.3.1 Port Status

This page can see every port status that depended on user setting and the negotiation result.
1. State: Display port statuses disable or enable. "Unlink" will be treated as "off".
2. Link: Down is "No Link", UP is "Link".
3. SNR: (Sign to Noise Ratio) The SNR can use as an indication of the quality of the Link. If SNR Value>25, it means
connection in Good Link status.
4. Speed: Ports 1-24 are 5/15/25Mbps VDSL, Port 25-26 are 10/100/1000Mbps.
5. Duplex: Display full-duplex or half-duplex mode.
6. Flow Control: Full: Display the flow control status is "enable" or "disable" in full mode.
Half: Display the backpressure is "enable" or "disable" in half mode
7. Rate Control: Display the rate control setting.
Ingr: Display the Port effective ingress rate of user setting.
Egr: Display the Port effective egress rate of user setting.
24VDSL+2Giga Ethernet Managed 4 Band VDSL IP DSLAM USER'S MANUAL Ver. A.4
25