Table of Contents
Advertisement
11.3 Remote Setup of ONVIF
If the device uses the ONVIF
video with the settings set during the device remote setup in the iNEX program. Click a device group in
the Site panel and then click a device in the Site List panel. Clicking the
Site List panel, or clicking the right mouse button displays the device menu. Selecting Remote Setup
Device displays the following setup screen and allows you to change the device's settings. The setup
menu and options may be different depending on the model of the device.
OR
Device Name: Edit the name of the input/output device.
You can use the same name for more than one input/output
device. The name will be updated automatically when the
name of the device to which the input/output device is
connected is updated.
Associated Audio Channel: Select the audio channel to
associate with the camera for audio recording (supported
only for a camera). The selected audio channel will be
recorded when video from the camera is recorded.
Associated Device: Select a camera channel to associate
with the alarm-in or audio-in device for display on the event
spot screen (supported only for an alarm in or audio-in
device). Video from the selected camera channel will be
displayed on the event spot screen when an alarm-in or
audio-in event is detected.
TM
TM
Conformance protocol, the iNEX program displays live video or records
Conformance Protocol Devices
Network Video Recorder
button at the bottom of the
97
Advertisement
Table of Contents
