Table of Contents
Advertisement
User's Manual
Event Recording Condition
The recording service records when predefined events are detected. This function may not be supported
depending on the protocol that the device uses (supported for the iNEX protocol and some versions of
TM
the ONVIF
Conformance and Axis protocol).
Name: Enter the Preset name.
Condition Type: Select Event Condition.
Select Target to produce event and event type: Select event types that trigger video recording.
−
Event from any device: Select to record video when
user-defined types of events are detected.
Click Event from any device, and the list of event
types is displayed in Event Types below → Select
the desired event types, and the selected event types
are added to the list under Event from any device
on the right.
−
All Devices: Select to record video when user-
defined types of events are detected from the selected
device or camera.
Click All Devices, and the list of registered devices
and cameras is displayed → Under All Devices, click
a device or camera to trigger event recording, and
the list of event types supported by the device or
camera is displayed in Event Types below → Select
the desired event types, and the selected event types
are added along with the selected device or camera
to the list under All Devices on the right.
60
Advertisement
Table of Contents
