User's Manual
Chapter 15 — Map Editor
You can register a map to monitor video from cameras, event detection and input/output device's status of
devices registered on the administration service on a map on the Client system.
NOTE: This function is supported only for devices which use the iNEX protocol, but monitoring video from
cameras supported also for devices which use the ONVIF
15.1 Registering Map
1. Run the iNEX Setup program → Select the Device menu.
2. Click Map in the Site panel, and then the
Map Editor window appears.
3. Select an input/output device connected to a device or a sub-map in the Site panel and drag and drop it
on the canvas.
4. Set up the map. Refer to 15.2 Setting up Map (p. 118) for details.
5. Entering a map name and clicking the OK button completes registration of the map.
118
TM
Conformance or Axis protocol.
button at the bottom of the Site List panel on the right. The