Table of Contents
Advertisement
Control Toolbar
When selecting a map and hovering the mouse cursor over the map, the control toolbar is displayed over
that map. The control toolbar allows you to control the selected map. Hovering the mouse cursor over a
button displays a tooltip for the button.
(Focusing Event): Allows you to select a desired event for auto focusing.
(Actual Size (x1)): Displays a map in its original size regardless of the map screen size or canvas's
aspect ratio.
(Zoom Finder): Displays or hides the PIP screen. The rectangle in the PIP screen indicates the enlarged
area. When set to Auto, the PIP screen is displayed only while a canvas is enlarged.
(Zoom In): Allows you to adjust the enlargement ratio of the canvas.
Example
When Zoom Finder is set to Off;
Map Monitoring
When Zoom Finder is set to Auto or On;
Map Monitoring
Map Screen Menu
The screen menu is displayed when selecting a map screen and clicking the right mouse button. The screen
menu allows you to control the selected map.
,
(Previous Map, Next Map): Moves to the previous or next connected
map of the maps that have been connected to the current map screen. Maps
can be connected by using map link or by selecting a map from the map list
and dragging and dropping it on the current map screen.
(Auto Focusing): Enlarges the area where the event-detected device is placed
when any event is detected. When events are detected in more than one device
at the same time, the canvas is enlarged as much as possible while still displaying
all event-detected devices. When events are detected in more than one device
consecutively, the focusing moves to the later detected event after the preset
time expires. Refer to 3.3 Client, Menu – Preference Settings, Map (p. 39)
for details about the auto focusing setting.
Event Detection
Event Detection
Network Video Recorder
Auto Focusing
Auto Focusing
53
Advertisement
Table of Contents
