Managing Schedule - Eneo PNR-5216 Operating Instructions Manual


Alarm Out: Select to activate alarm out when an event is detected based on the event condition setting
(supported only for devices which use the iNEX protocol).
4. Select the users to be notified the events after double clicking the Target schedule window.

Managing Schedule

Adding a New Schedule
 Adding a new schedule with a different time range: Clicking the
of the Time Coverage schedule window allows you to add a new schedule with a different time coverage.
−
Select PTZ Camera: Select cameras to
move. This is supported for PTZ cameras
only.
−
Selected PTZ Camera: Displays the
selected cameras and allows you to select a
Preset position for the camera to move. Refer
to 4.3 Controlling Cameras, PTZ Control,
PTZ Preset Control (p. 52) about setting
up Preset positions.
−
Duration: Enter the duration for the alarm out to
last.
−
Select Alarm Out Devices: Select alarm out
devices to activate.
button in the upper left corner
Network Video Recorder
113