Chapter 18 - Federation Service; Installation - Eneo PNR-5216 Operating Instructions Manual

16 ip-channel, h.264
Hide thumbs Also See for PNR-5216:
Table of Contents

Advertisement

User's Manual
Chapter 18 — Federation Service
The federation service allows you to monitor live video from devices registered on the NVR system and
to play back video recorded in the NVR system that are registered on the federation service.
System Requirements
 Operating System: Microsoft
Enterprise), Microsoft® Windows® 7 (Home Premium, Professional, Ultimate), Microsoft
Server 2003/2008
 CPU: Intel Core II Quad 8200 2.33 GHz/Intel Xeon 3.0 GHz or faster
 RAM: 2GB or more
 VGA: ATI RadeonTM HD 2400 or NVIDIA GeForce FX5500 (ATI recommended) (1024x768, 24bpp
or higher)
 Hard Disk Drive: 5 GB or more free space
 LAN: Gigabit Ethernet or faster
NOTE: In this manual, the "server or server system" refers to a PC running the federation service.

18.1 Installation

NOTES:
 You cannot install the federation service on a PC on which any other iNEX services are installed.
 In the Windows Start menu, go to Control Panel. Double click the Power Options to open the Management
Properties dialog box. Under the Power Schemes tab, set both Turn off monitor and Turn off hard disks
to Never.
CAUTION: If an older version of iNEX software is installed on your computer, a screen
appears asking you to upgrade the software. In this case, you are required to upgrade the
software according to the instructions in the screen.
1. Insert the software CD in the federation server.
2. Run the FederationServiceSetup.exe file in the Setup folder of the software CD.
NOTE: The User Account Control window might appear when using the Microsoft
operating system. Click Allow and install the software following the instructions.
3. Select the language in which to run the program and then click OK.
NOTES:
 To properly display the selected language, your PC's operating system should be set to support the
selected language.
 To change the iNEX program's language after the software has been installed, select Language Selector
in the iNEX → Utility folder of the Start menu before running the iNEX program.
132
®
®
Windows
XP x86 (32 Bit)/Vista (Home Standard, Business, Ultimate,
®
Windows
®
®
Windows
Vista or later
®

Advertisement

Table of Contents
loading

Table of Contents