Table of Contents
Advertisement
NOTE: The NVR system name you entered in the Name field should be checked by clicking the Check button,
otherwise the DVRNS changes will not be saved. When entering no name or a name already registered
on the DVRNS server, an error message displays.
SSL
2.3 Registering Devices
You must register devices on the administration service and add the devices to a device group in order to
perform any operation.
Run the iNEX Setup program.
1. Select the Device menu.
2. Click All Devices in the Site panel, and then the
Device Scan window appears.
Use SSL: Allows you to enhance the security of data
transferred between services of the iNEX program
by using the SSL (Secure Sockets Layer) protocol.
Using the SSL function might cause congestion in
the NVR system depending on the security level.
Log in the iNEX program again after you change
the setting. When the setting is changed, all services
that are currently connected to the administration
service reconnect, and the iNEX Setup and iNEX
Client programs are logged out.
button at the bottom of the Site List panel. The
Network Video Recorder
11
Advertisement
Table of Contents
