Table of Contents
Advertisement
Map Event Spot Setup
NOTE: The "map event spot" in the iNEX program is a predefined camera screen in which video from a camera
which an event is detected among cameras on a map can be monitored with emphasis. The map event spot
screen is surrounded by a gray outline.
1. Select a camera screen to set up as a map event spot screen on the current monitoring screen.
2. Click the
(Map Event Spot) button on the toolbar at the bottom of the Live panel, and the current
connection in the selected camera screen is released. The map event spot screen is surrounded by a gray
outline.
3. When an event is detected, video from the event-detected is displayed on the map event spot screen.
Layout Monitoring
You can monitor video from multiple cameras in a predefined layout. A layout should be registered on the
NVR system for layout monitoring. Refer to the following explanation for details about layout registration.
NOTE: A "layout" in this manual refers to a screen organization created by arranging specific cameras in a
specific screen format.
Select a desired layout from the Layout list, and drag and drop
it on the Live screen. Video from cameras added to the Layout
is displayed in the predefined screen format on the screen.
Registering Layouts
1. Go to the System menu, and click iNEX Setup, and select the Device menu.
CAM3:
An event is detected.
[Map] CAM3:
An event is detected.
Network Video Recorder
43
Advertisement
Table of Contents
