User's Manual
Chapter 17 — Remote Monitoring
You can monitor video from devices registered on the NVR system or play back video recorded in the NVR
system remotely by installing the iNEX Client program on a PC. Operating the iNEX Client program on
a PC is identical to on the NVR system. Refer to 3.3 Client (p. 29) for details.
Client System Requirements
Recommended Requirements
Operating System: Microsoft
Enterprise), Microsoft
CPU: Intel Core II Quad 8200 2.33 GHz or faster
RAM: 2GB or more
VGA: ATI RadeonTM HD 3650 or NVIDIA GeForce 8400GS (ATI recommended) (1024x768, 24bpp
or higher)
Hard Disk Drive: 350 MB or more free space
LAN: Gigabit Ethernet or faster
Minimum System Requirements
Operating System: Microsoft
CPU: Intel Pentium IV 3.0 GHz or faster
RAM: 1.5 GB or more
VGA: ATI RadeonTM HD 2400 or NVIDIA GeForce FX5500 (ATI recommended) (1024x768, 24bpp
or higher)
Hard Disk Drive: 350 MB or more free space
LAN: 10/100 Mbps Ethernet or faster
17.1 Installation
CAUTION: If an older version of iNEX software is installed on your computer, a screen
appears asking you to upgrade the software. In this case, you are required to upgrade the
software according to the instructions in the screen.
1. Insert the software CD in the Client PC.
2. Run the ClientSetup.exe file in the Setup folder of the software CD.
NOTE: The User Account Control window might appear when using the Microsoft
operating system. Click Allow and install the software following the instructions.
3. Select the language in which to run the program and then click OK.
NOTES:
To properly display the selected language, your PC's operating system should be set to support the
selected language.
To change the iNEX program's language after the software has been installed, select Language Selector
in the iNEX → Utility folder of the Start menu before running the iNEX program.
128
®
®
Windows
XP x86 (32 Bit)/Vista (Home Basic, Business, Ultimate,
®
®
Windows
7 (Home Premium, Professional, Ultimate)
®
®
Windows
XP Home SP 3
®
®
Windows
Vista or later