Starting System; Quick Setup - Eneo IER-28R160005A Quick Installation Manual

3. Install HDD in the bottom case.
4. Connect a data cable and power cable with HDD.
5. Close the cover and tighten screws.

Starting System

Power supply begins with system operation as follows:
1. Switching on initialize with below icons in order.
i Notice: Installing new HDD might take more initialize time.
2. With buzzer sounds, the start screen is presented.
3. In Log in screen, enter the ID, Password and press OK.
i
Notice: Default ID & Password is admin/admin. For security reasons, please note in
the event the password is lost the device must be returned to our Service Centre so the
password can be reset.
CAUTION:

Quick Setup

First start of the system operates easy installation as follows:
1. Account
2. System
3. Network
Please change password after login due to security.
EN
9