Eneo PNR-5216 Operating Instructions Manual page 153

 Time Coverage preset: Select the Always preset.
 Condition preset
− Condition Type: Select Event Condition.
− Select Target to produce event and event type: Select All Devices, Inside 1, and CAM1 in order.
− Event Types: Select Motion Detection.
 Action preset: Select a desired Preset.
 Target preset: Select the Same cameras that triggered an event option.
Example II
If motion detection events are detected at camera 1 on the Inside 1 device, and you want to record video
from that camera and camera 1 of the Inside 2 device, set up as follows:
Network Video Recorder
145