Cascade - Eneo PNR-5216 Operating Instructions Manual

User's Manual
button at the top right corner and select a setup file to apply → Services of the current NVR
Click the
system are displayed to the left of the
right of the icon. Select the service to apply from the drop-down menu to the right of the
there is only one service for a service type to the left of the
services that were backed up from the current NVR system, the services in the setup file will be applied
automatically → Click the Import button at the bottom → The iNEX Setup program restarts after applying
is complete.
NOTE: This is not supported in the following cases:
– When the software version of the services to the right of the
the left of the icon.
–
When the type of the services to the left and right of the

Cascade

If you use more than one NVR system, you can run the NVR systems as a master or slave systems. It allows
you to watch video from all devices registered on the master and slave NVR systems and search all video
recorded in the master and slave NVR systems in the master NVR system.
Run the iNEX Setup program → Click the
22
icon. Services that are saved in the setup file are displayed to the
(Cascade) button.
icon or the services in the setup file are the
icon is later than that of the services to
icon differs.
icon. If