Table of Contents
Advertisement
User's Manual
3. Double click the Action schedule window and select the desired Preset (supported only for devices which
use the iNEX protocol).
4. Select the cameras to be recorded after double clicking the Target schedule window.
58
You can add a new Preset or edit a saved Preset by clicking
the Add or Modify button. Clicking the Add or Modify
button displays the following setup screen.
A stream to use for recording (network cameras only) or a
codec, resolution, frame rate and quality setting values
(network video transmitters only) are allocated to each
Preset. The stream or setting values allocated to each Preset
is different depending on the device. Refer to 11.2
Managing Devices, Editing Device Information (p. 92)
for details.
Duration: This is not supported for time-lapse recording.
Select cameras from the device list to record video or select device
groups from the device group list. The Same cameras that
triggered an event option is not supported during Time-Lapse
recording.
Enter the Preset name and select Time
Condition from the Condition Type list.
Advertisement
Table of Contents
