Table of Contents
Advertisement
1.4 Front Panel
① Power Button: Turns on or off the system. It is lit when the unit is turned on.
② HDD LED: Flickers when the unit accesses to the hard disk drive.
③ USB Port: Connects the USB devices.
NOTE: Windows may not operate properly when using the USB connectors on the front panel of the unit,
depending on the model type of the USB device. In this case, connect the USB device after Windows boots
properly or use the USB connectors located on the rear panel.
1.5 Upgrade
You can upgrade the NVR system by using a USB flash drive as follows:
NOTE: Upgrading by using a USB flash drive is supported for the users belonging to the default user group
(Administrators).
1. Connect a USB flash drive containing the upgrade package file to the NVR while the iNEX Client program
is running.
2. Click iNEX Update under the System Menu in the NVR system. The following window appears.
button and select a Standard.conf file. The folder path and software version of the selected
Click the
file is displayed. → Click the Upgrade button. → The iNEX Client program closes and the NVR system
enters Windows mode. → The NVR system starts upgrading. When upgrade is complete, the iNEX
program runs automatically.
Network Video Recorder
3
Advertisement
Table of Contents
