Table of Contents
Advertisement
User's Manual
−
DVRNS: Allows you to enter the device name registered on a DVRNS server if the device uses the
DVR Name Service (DVRNS) function. Ensure the DVRNS server information on which the device
is registered is correct (Service menu →
is not correct, the device will not be found.
−
Domain Name: Allows you to enter the device's domain name registered on a DNS server if the
device uses the domain name service.
: Select the devices to register by checking the box beside each device name in the list. Selecting
the Select All box selects all devices in the list.
NOTES:
Depending on the model, the device may not be supported even though the iNEX program supports the
device's protocol. Ask your dealer or distributor about supported models.
If the device uses the ONVIF
protocol) or the ONVIF
not supported depending on the device model. Ask your dealer or distributor for details. Refer to the
device User's Manual about enabling the ONVIF
may differ for each model.
2. Click the Add Devices button at the bottom.
Name, Address, Device Type: Displays the name, IP address and type of the selected device. The
name will be updated automatically depending on the settings of the device.
ID, Password: Enter the user ID and password which you set in the device in order to connect to that
device remotely. The connection to the device is allowed only to the users under the Administrator
group of the device, and recording is allowed only to the admin user under the Administrator group
of the device.
Recording Service: Select a recording service (supported only for the network video devices). The
device is registered on the recording service and the recording service performs recording according
to a recording schedule. The channel number of the recording service indicates the maximum number
of cameras that can be registered, and the name indicates the name of a recording service, which was
set during the Service menu setup. When selecting the Do not record option, the iNEX program treats
the device during the Schedule setup as though it was not registered and does not perform any of the
scheduled activities associated with the device. If you delete the device from the recording service
after some recording has been done, you cannot search or play back the previously recorded video
though you register the device again. You can check the list of devices registered on the recording
service on a Device Setup tab while setting up the recording service in the Service menu. Refer to
Chapter 13 — Storage Management (p. 105) for details.
90
TM
Conformance protocol, you can select either the manufacturer (or iNEX
TM
Conformance protocol. However, it is possible that one or both of them are
(System Setup) button). If the DVRNS server information
TM
Conformance protocol in the device, as procedures
Advertisement
Table of Contents
