Table of Contents
Advertisement
User's Manual
−
Auto Scan (LAN): Lists devices in a LAN environment (supported only for the network video devices).
If the device uses the ONVIF
checked the Disable WS-Discovery Windows Service (fdPHost, FDResPub) box during the
software installation in Microsoft
uses the ONVIF
DHCP (Dynamic Host Configuration Protocol). If the device is networked via DHCP, connection
to the device may not be made properly depending on changes in the external network environment.
−
IP Address: Allows you to enter the IP address of a device. You can search more than one device
at a time by entering a range of IP addresses. It is recommended that the device not be networked
via DHCP (Dynamic Host Configuration Protocol). If the device is networked via DHCP, connection
to the device may not be made properly depending on changes in the external network environment.
−
DVRNS: Allows you to enter the device name registered on a DVRNS server if the device uses the
DVR Name Service (DVRNS) function. Ensure the DVRNS server information on which the device
is registered is correct (Service menu →
is not correct, the device will not be found.
−
Domain Name: Allows you to enter the device's domain name registered on a DNS server if the
device uses the Domain Name Service.
: Select the devices to register by checking the box beside each device name in the list. Selecting
the Select All box selects all devices in the list.
NOTES:
Depending on the model, the device may not be supported even though the iNEX program supports the
device's protocol. Ask your dealer or distributor about supported models.
If the device uses the ONVIF
protocol) or the ONVIF
not supported depending on the device model. Ask your dealer or distributor for details. Refer to the
device User's Manual about enabling the ONVIF
may differ for each model.
3. Click the Add Devices button at the bottom.
Name, Address, Device Type: Displays the name, IP address and type of the selected device. The
name will be updated automatically depending on the settings of the device.
ID, Password: Enter the user ID and password which you set in the device in order to connect to that
device remotely. The connection to the device is allowed only to the users under the Administrator
group of the device, and recording is allowed only to the admin user under the Administrator group
of the device.
14
TM
Conformance protocol, this function is supported only when you have
®
Windows
TM
Conformance protocol, it is recommended that the device not be networked via
TM
Conformance protocol, you can select either the manufacturer (or iNEX
TM
Conformance protocol. However, it is possible that one or both of them are
®
Vista or later operating systems. Also, if the device
(System Setup) button). If the DVRNS server information
TM
Conformance protocol in the device, as procedures
Advertisement
Table of Contents
