Table of Contents
Advertisement
User's Manual
Network Protocols
WS-Discovery
User
100
Network Protocols: Changes the port numbers
of the network protocols that are used in the
device (supported only for the protocols that
are used in the device).
NOTE: When the HTTP server's port number is
changed, the setup screen closes, and you should
change the HTTP port number in the iNEX Setup
program too. Refer to 11.2 Managing Devices,
Editing Device Information (p. 92) for details.
Scope Parameters: Click the
add the scope parameters of WS-Discovery
(Web Services Discovery) protocol if necessary.
Discovery Mode: Sets whether or not to permit
discovery of the device. When Non-
Discoverable is selected, the Auto Scan
function is not supported for the devices which
TM
use the ONVIF
Conformance protocol during
the device registration.
You can add or delete a user. Clicking
allows you to add a user.
button and
button
Advertisement
Table of Contents
