Table of Contents
Advertisement
Streaming Service: Select whether or not to use the streaming service for monitoring video from the
device. If the device uses the streaming service, the iNEX program transmits video from the device
to the client system through the streaming service, and it allows multiple users to monitor video
simultaneously. The number of channels that can be streamed equals the number of channels that
can be recorded. Refer to Chapter 10 — Streaming (p. 85) for details.
Apply to All Devices: Select to apply the same user ID and password to all selected devices if you
selected more than one device and the selected devises have the same user ID and password.
NOTES:
If the device is a DVR, it might be necessary to enter the DVR port numbers depending on the specifications
and version of the DVR.
When registering a four-channel network video transmitter which uses the iNEX protocol, all four cameras
are automatically registered even if some of the four cameras are disabled.
3. Click Device Group in the Site panel, and then the
Device Group window appears.
Name: Enter the device group name.
Location: Select an upper group to which the device group will belong.
Select Devices Below, Selected Device List: Check the box beside cameras in the left panel, and
the selected cameras are added to the right panel.
Clicking the OK button completes the device group registration.
4. Check that the device was added to the device group correctly. Click Device Group in the Site panel
and then the arrow button (
devices added to the device group and connection status in the Site List panel. If the connection was not
made properly, the network disconnection log is displayed (only for devices registered on the recording
service). Refer to Appendix – Network Disconnection Log (p. 145) for details about the network
disconnection log.
) beside Device Group. Clicking the registered group displays the list of
button at the bottom of the Site panel. The Add
Network Video Recorder
91
Advertisement
Table of Contents
