Table of Contents
Advertisement
4. When the following screen appears, click Next.
5. Designate the folder path to install the Client program.
Clicking the Disk Cost... button shows the available and
required disk space for each hard disk drive for the installation.
Then click Next.
6. When the following screens appear, click Next.
NOTE: The following screen appears when using the Microsoft
®
Windows
Vista or later operating system. It is recommended
that you check the Disable WS-Discovery Windows Service
(fdPHost, FDResPub) box. If you do not check the box, the iNEX
program cannot auto-scan the devices that use the ONVIF
Conformance protocol when scanning the devices for device
registration.
®
TM
Network Video Recorder
129
Advertisement
Table of Contents
