Setting Up Event-Based Recording - Eneo PNR-5216 Operating Instructions Manual

5. You can check the recording status in the Device menu. Click All Devices in the Site panel and all
registered devices are displayed in the Site List panel. Click the arrow button (
name, and check the status (Record: During Time-Lapse recording or Event-Based recording, Panic:
During Instant recording, Idle: Ready to record). The Time-Lapse Recording or Event-Based Recording
OSD ( ) is displayed in the upper right corner of the camera screen of the Live screen in the iNEX Client
program.

Setting up Event-Based Recording

During Event or Pre-Event recording, the recording service records video based on the event detection for
the scheduled time (supported only for devices registered on one of recording services). Event related
functions may not be supported depending on the protocol that the device uses (supported for the iNEX
protocol and some versions of the ONVIF
1. Set the schedule time by double clicking the Time Coverage schedule window, and then selecting a
desired Preset. The way to set up the schedule time for Event or Pre-Event recording is identical to the
way to set up for Time-Lapse recording. Refer to Setting up Time-Lapse Recording (p. 57) for details.
2. Set up the recording mode to Event Recording or Pre-Event Recording by double clicking the Condition
schedule window. Then select a desired Preset of event or pre-event condition.
TM
Conformance and Axis protocol).
You can add a new Preset or edit a saved Preset by clicking
the Add or Modify button. Clicking the Add or Modify
button displays the following setup screen.
Network Video Recorder
) beside the device
59