Table of Contents
Advertisement
1. Select the Device menu.
2. Click All Devices in the Site panel, and then the
Device Scan window appears.
Protocol: Select the protocol or manufacturer of the device to scan. Event related functions may
not be supported depending on the protocol that the device uses (supported for the iNEX protocol
and some versions of the ONVIF
not be supported depending on the settings of the device.
Scan Mode: Select the scan mode. Clicking the Start Scan button displays the results in the list. If
the IP address range of the device is different from that of the NVR system, the iNEX program considers
the IP address invalid. In this case, you must change the device's IP address to register the device.
button at the bottom of the Site List panel. The
TM
Conformance and Axis protocol), and some other functions may
Network Video Recorder
13
Advertisement
Table of Contents
