Table of Contents
Advertisement
①
(Service Database Backup),
related to services as an .iexp file in the USB storage device. It also, allows you to apply the saved setting
values to the current NVR system. Refer to 3.1 Service Manager, Service Database Backup/Restore
(p. 21) for details.
② (Cascade): If you use more than one NVR system, you can run the NVR systems as a master or slave
systems. It allows you to watch video from all devices registered on the master and slave NVR systems
and search all video recorded in the master and slave NVR systems in the master NVR system. Refer
to 3.1 Service Manager, Cascade (p. 22) for details.
③ Service List: Displays list of services supported in the iNEX program. Clicking the arrow button ( )
beside each service displays the list and information about services registered in the iNEX program.
Address: Displays the IP address and port number.
−
Status: Displays the connection status.
−
④
Entering text that you want to search for causes the search results to be displayed. Search results are
displayed immediately as matching text is found. As you enter more text, the results narrow.
⑤
(Add),
(Remove),
Chapter 13 — Storage Management (p. 105) for details about adding storage for a recording.
Device
The Device menu allows you to register and manage sites.
(Service Database Restore): It allows you to save the setting values
(Incremental Search): Allows you to search for a service registered in the NVR system.
(Edit): Allow you to add, remove and edit a service and storage. Refer to
Network Video Recorder
25
Advertisement
Table of Contents
