Osd Information; Network Disconnection Log - Eneo PNR-5216 Operating Instructions Manual

16 ip-channel, h.264
Hide thumbs Also See for PNR-5216:
Table of Contents

Advertisement

User's Manual
 Time Coverage preset: Select the Always preset.
 Condition preset
− Condition Type: Select Event Condition.
− Select Target to produce event and event type: Select All Devices, Inside 1, and CAM1 in order.
− Event Types: Select Motion Detection.
 Action preset: Select a desired Preset.
 Target preset: Release the Same cameras that triggered an event option → Select CAM1 of the
Inside 1 device and CAM1 of the Inside 2 device from the All Devices list.

OSD Information

The OSD (On Screen Display) is displayed in each camera screen in the Live screen of the iNEX Client
program.
(Red: Is displayed during recording in Time-Lapse Recording or Event-Based Recording mode),
(Orange: Is displayed during recording in Instant Recording mode): Indicates video is being recorded
in the NVR system (upper right corner of the screen).
(Zoom In): Indicates video is zoomed in (upper right corner of the screen).
 Date, Time: Indicates the date or time of the NVR system (bottom of the screen).
 Event Alert: Indicates an event detected (highlights the camera title bar in red).
 Motion Block: Indicates a motion event detected in the boxed area (on image) (supported only for network
video transmitters which use the iNEX protocol).

Network Disconnection Log

ID
0
1
2
3
4
10
11
12
13
15
16
20
146
 Camera Title: Indicates the camera name set in the iNEX program (upper left
corner of the screen).
(Listen or Talk): Indicates the Client system can receive audio from or sends
audio to the device (upper right corner of the screen).
(PTZ): Indicates PTZ control is enabled (upper right corner of the screen).
(Camera Sequence): Indicates the cameras are being sequenced (upper right
corner of the screen).
Unknown error.
Logout.
All channels of the device are being used.
Invalid product version.
Invalid user ID or password.
No device is running.
Network is down.
Cannot reach the device's network.
Connection timeout.
Cannot reach the recording service.
No route is found to the device.
Connection cancelled.
Explanation

Advertisement

Table of Contents
loading

Table of Contents